DUTCH Studio 8c 소유자 매뉴얼 - 페이지 7

{카테고리_이름} DUTCH Studio 8c에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DUTCH Studio 8c 15 페이지.

페이지 인쇄

Product configuration

Tweeter and waveguide

A ferrofluid–enhanced 1" aluminium-magnesium

alloy dome tweeter is coupled to an 8" constant

directivity

waveguide.

optimization of the waveguide, baffle dimensions

and baffle edge roundovers, its frequency response

is virtually flat, both on and off axis. The stiff and

light membrane is resonance-free throughout the

audible range.

Midwoofer and passive cardioid cabinet

The 8" woofer has a light, stiff woven polypropylene

cone. Its high internal damping and advanced

surround design suppress resonances in the

woofer's operating range. The long voice coil is

wound on an aluminium former, providing high

power handling and low thermal compression.

The passive cardioid cabinet weakens rearward

radiation by over 15 dB, resulting in low

reverberation and very flat power response.

Cabinet construction

The exterior panels of the cabinet are made of 19

mm thick solid oak wood, whereas the internal

construction is made of 18 mm birch plywood. In

combination with rabbeted joints and extensive

bracing, this results in a strong, rigid construction.

The outer baffle is made of spray painted ABS and

damped with a special sound deadening compound

to avoid resonances. It is invisibly affixed with six

threaded steel rods.

Thanks

extensive

Subwoofers and sealed cabinet

The rear section of the cabinet houses two long-

stroke, high-power 8" subwoofer drivers in a sealed

cabinet. The low-Q alignment results in tight,

controlled, and extended bass.

Crossover and electronics

The midwoofer and tweeter are crossed over with a

4th order Linkwitz-Riley filter slopes at 1250 Hz for

optimal driver integration and minimal interference.

FIR filtering ensures high power handling and

perfect impulse response.

A separate compartment houses the amplifiers,

which provide 500 W to the subwoofers, 250 W to the

midwoofer and 250 W to the tweeter, as well as the

signal processing and communication electronics.

Filtering, room correction and equalization options

are accessible through the platform–independent

Clerk™ interface, enabling easy integration into any

system.