DUTCH IM1.2 매뉴얼 - 페이지 4

{카테고리_이름} DUTCH IM1.2에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DUTCH IM1.2 5 페이지. Insert matrix

Note: Be careful with DB25 tascam standard premade cables. The digital AES/EBU cables like

the Hosa AES-803T have their XLR's connected in the wrong way which swaps send/return.

Though it's an easy fix (swap all XLR male and female), you might want to look at this carefully.

Outputs:

On the rearpanel you will find the output with balanced gold-plated Neutrik XLR's.

Power:

The 'power' input is for connecting the external power-supply to the IM1.2.

Technical:

Hardware:

This device is built around mostly passive circuits, but some sections need to be active, but

always with transparency in mind. The sturdy frontpanel-switches have, depending on their

function, 2 color leds for visual feedback. All relays are high sensitive, long-life (15.000.000

cycles) Omron Relays.

Stepped switches are military grade Blore Edwards for long life and really nice mechanical feel.

In and output connectors are gold plated Neutrik and industrial DB25 connectors for inserts.

Active circuits make use of analog devices, THAT and Burr Brown drivers. The mid/side circuit

is based on the well-known circuit from Wayne Kirkwood, but with additions/modifications.

The external PSU is build around long-life industrial Meanwell SMPS's which run with way less

noise and are way more efficient then linear PSU's. Both the relays/leds and active circuit

PSU's are running on their own separate PSU.

When this device is used in passive mode, so without active stages, it's 100% passive and only

relay-contacts are inline. This means it's basically a straight wire.

Pushswitch labeling:

To have some extra visual feedback on the push-switches you can put labels under the switch-

covers. You can simply, but carefully, remove the switch cover with a small screwdriver and

put something like a transparent dymo letratag sticker on the white plastic piece inside the

switch-cover.