CBT Supply flipIT RIMLESS 조립 지침 매뉴얼 - 페이지 8

{카테고리_이름} CBT Supply flipIT RIMLESS에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. CBT Supply flipIT RIMLESS 12 페이지. Convertible computer workstation

use the 5/32" hex key and 3/8" open end

wrench to tighten the rest. This is using the

table top as a reference and the pressure you

place on the rest to simulate the weight of

the monitor.

The weight of the monitor compresses the

rest, so it will be necessary to adjust the top

again after the monitor has been installed.

be familiar with this adjustment.

7. Install three legs

use a Phillips #2 drive or 3/8" hex drive to

install eight 1/2" bolts for each leg.

assemble the rest

bracket and padded

rest together using

the hex nut, lock

washer and hex key

head bolt.

Leave the hex nut

finger tight so it can

be adjusted.

use two 1/2" wood

screws to install

bracket.

FIK19R Rimless flipIT ® by SMaRTdesks®

www.smartdesks.com

800-770-7042