Datamax I-Class Mark II 빠른 시작 매뉴얼 - 페이지 4

{카테고리_이름} Datamax I-Class Mark II에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datamax I-Class Mark II 4 페이지. General purpose input output (gpio) option
Datamax I-Class Mark II에 대해서도 마찬가지입니다: 설치 및 사용 설명서 (12 페이지)

4
Ready Mode:
Menu Mode:
Pause: Toggles the pause condition.
Arrow Up:
Feed:
The FEED button feeds a
label, and clears any faults
that have been corrected.
Arrow Down: Moves to the previous item in
Cancel: Cancels a job and pauses the
printer.
Enter:
Menu: Toggles between the ready
and menu mode.
ESC:
Test:
Enables the quick test mode,
see the Operators Manual
for additional information.
Indicators:
Ready: On indicates ready, blinking
indicates menu mode.
Stop: On indicates paused state.
Error: On indicates a fault. To clear a fault
press the feed button.
5
With the Printer On, and loaded with media (at least 4 inches wide):
Verify the printer is in the 'Ready Mode'
Press the
button.
Using the
button scroll to 'Print Config Label'. Press the
Be sure to follow and perform the suggested Cleaning Schedule listed in
the Operator's Manual.
Moves to the next item in the
menu tree, (increase values).
For more information on custom programming or any of the topics
referred to in this guide, see the Operator's Manual and Programmer's
the menu mode, (decrease
Manual on the CD-ROM provided.
values).
Selects a displayed item or
value.
Moves to the previous menu
level.