DutchCrafters Cayman Crib 조립 지침 - 페이지 2
{카테고리_이름} DutchCrafters Cayman Crib에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DutchCrafters Cayman Crib 4 페이지.
페이지 인쇄Step 1
Lock Washer and
¼" x 3"
Connector Bolt
Long Post (E)
- Figure 2 -
Attach small end panels (B) to posts (F) with two ¼" x 3" connector
bolts and two lock washers. Attach small end panels (B) to posts
(G) with two ¼" x 2½" connector bolts and two lock washers. Turn
connector bolts snug. *Make sure label is visible on the outside of the
crib. The word "inside, " located on bottom rails, should be on the inside
of the crib. Do not over tighten!
Step 2
Attach posts (E, F) to ends of large back panel (B) with two ¼" x 3" connector
bolts, two ¼" x 4" connector bolts, and four lock washers using allen wrench
connector bolts snug. The word "inside, " located on bottom rails, should be on
Long Post (E)
I
nstructIons for
FIGURE 1
Lock Washer and
¼" x 2½"
Connector Bolt
(A)
End Panel
Label
2 pcs.
I
nstructIons for
provided. Connector bolts screw into metal inserts in ends of panels. Turn
the inside of the crib.
Do not over tighten!
(B)
Back Panel
- Figure 1 -
Attach small end panels (A) to posts (D) with two ¼" x 2½"
connector bolts and two lock washers. Attach small end
panels (A) to posts (E) with two ¼" x 3" connector bolts and
two lock washers. Turn connector bolts snug. *Make sure label
is visible on the outside of the crib. The word "inside, " located
on bottom rails, should be on the inside of the crib. Do not
over tighten!
Short Post (D)
Lock Washer
and
¼" x 3"
Connector Bolt
Long Post (F)
End Panel 2 pcs.
A
ssemblIng
Lock Washer and
¼" x 4"
Connector Bolt
Long Post (F)
A
c
ssemblIng
FIGURE 2
Short
Post (G)
Lock Washer
and
¼" x 2½"
Connector Bolt
(B)
c
AymAn
Tools Needed:
Lock Washer and
¼" x 3"
Connector Bolt
c
AymAn
rIb
Tools Needed:
c
rIb