Datamax MP-Nova6 DT 네트워크 매뉴얼 - 페이지 12

{카테고리_이름} Datamax MP-Nova6 DT에 대한 네트워크 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datamax MP-Nova6 DT 19 페이지. Network & communication guide

Network & Communication

1. Here you can see if TCP/IP printing is installed.

If not, click the "Add" button.

2. Select Microsoft TCP/IP printing and press OK.

1. When this is done an LPR port must be added to enable

the printer driver to print to a specific IP address. There

are normally two drivers to use: the Datamax driver or a

generic text driver. The generic text driver should be

used if a text file containing Labelpoint commands (the

printer command language) is going to be sent to the

printer, while the Datamax driver creates these

Labelpoint commands from, for example, a label created

in MS-word.

To add an LPR port:

2. Go to "Printers" and "Properties" for looking up which

specific driver to use (in this example we use Datamax

driver).

3. Select "Ports" and press "Add port..."