Datamax MP-Nova6 TT 네트워크 매뉴얼 - 페이지 15

{카테고리_이름} Datamax MP-Nova6 TT에 대한 네트워크 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datamax MP-Nova6 TT 19 페이지. Network & communication guide

Network & Communication

Communication Modes

The printer can be configured in order to communicate in a

number of ways. There are four physical connections available:

•

COM1, COM2, USB and NET, see section

"Communication Ports".

•

COM1 and COM2 can be set up to work in four different

modes:

•

•

Terminal server mode

(passive mode = server mode,

active mode = client mode).

•

Stacked printers (print mode).

•

Pass-through mode (print mode).

The network connection consists of a number of TCP (logical)

ports. The Telnet port (23) is always set in print mode. When

COM1 (and/or COM2) is set up for terminal server mode, an

additional TCP port is opened to handle the communication. The

default TCP port for COM1 is 2001 and the default port for COM2

is 2002.

Print Mode

The printer scans all print mode ports for data until characters are

received for one of the ports. Then the printer uses that port

alone for communication until one of the following two commands

is received

•

!D D E (document end).

•

!C (clear layout),

if not !D D S (document start) has been sent.

This makes it possible for the printer to separate print jobs from

different hosts.

Example

COM1 and COM2 are set up for print mode. No data has yet

been received. The printer scans COM1, COM2 and the Telnet

port for data. Label layout data and a print command are received

on COM2. The printer locks to COM2, executes all commands

and a label is printed. !C is received and the printer releases the

lock and starts to scan the ports again.