Datamax PrintPAD CN70 사용자 설명서 - 페이지 6

{카테고리_이름} Datamax PrintPAD CN70에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datamax PrintPAD CN70 14 페이지.
Datamax PrintPAD CN70에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지)

Loading Paper

1. Press a new roll of paper into the paper cavity. The end of the roll should exit from the bottom of the paper cavity
and face the printer's roller (Figure 8). When properly installed, the roll of paper "latches" into place.
Figure 8
2. Raise the printhead release lever until it is fully open. The lever clicks midway at the partially open position;
however, do not stop here, continue to raise the lever until it is fully open (Figure 9).
3. Wake up the printer by momentarily pressing the red self-test button (Figure 10).
Figure 9
4. Feed the end of the paper and center it under the roller until the paper exits from the top of the printhead (Figure
11). The printer has an auto advance feature that will aid moving the paper through the printer. Verify the paper
exits straight.
5. Lower the printhead release lever (Figure 12).
Figure 11
6. Remove any excess paper by grasping the top corner of the paper and pulling it up and away.
7. Close and latch the printer's cover.
Roller
End of paper roll
Paper latch
Printhead
release lever
Figure 10
Figure 12
Self-test
button
4
PrintPAD CN70 USER'S GUIDE