Datamax E-Class Mark III 빠른 시작 매뉴얼

{카테고리_이름} Datamax E-Class Mark III에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datamax E-Class Mark III 7 페이지. Paper menu

Paper Menu Introduction
The Paper Menu is a feature that allows the operator to change the printer's settings without the need of a
host computer or additional software. This document explains how to use the internal Paper Menu and
change the printer settings.
Requirements:
Basic or Advanced E-Class Mark III printer.
Firmware version 14.134 or greater or printer Serial# 4xxxxxxx or greater.
Printer loaded with full width media, at least 4" (102mm) wide.
Accessing the Paper Menu
There are two ways to access the Paper Menu, depending on the state of the printer. The illustrations
below show the sequence of steps for when the printer is already on and when the printer is off. The left
LED blinks green at a 1 second interval once the Paper Menu has been accessed.
From the Power Off State:
Printer is OFF
Turn On
i n i t i a l i z i n g
Green, Off
Press and hold
Release Button
Enter
Paper Menu
Selection Mode
Green, Slow Blink
1
92-2604-01 Rev.C
Paper Menu
Both Flashing