Datamax H-Class 매뉴얼 - 페이지 8

{카테고리_이름} Datamax H-Class에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datamax H-Class 12 페이지. Cutter option
Datamax H-Class에 대해서도 마찬가지입니다: 매뉴얼 (8 페이지), 빠른 시작 매뉴얼 (12 페이지), 매뉴얼 (14 페이지), 매뉴얼 (10 페이지)

Datamax H-Class 매뉴얼
Maintaining the Cutter
To ensure trouble free operation, the Cutter should be cleaned (using the items listed below) after printing
each roll of labels, and more often if the cutting action becomes sluggish.
Recommended Cleaning Items
Isopropyl alcohol
Cotton swabs
Compressed air or soft-bristle brush
Remove power before performing maintenance.
Cutter Blades are SHARP. Keep body parts away from the cutting surfaces.
Never use metal objects on the cutting surfaces.
CAUTION
Take proper precautions when using isopropyl alcohol, a flammable liquid.
Follow these steps to clean the Cutter:
1) Turn OFF the Power Switch and unplug
the power cord from the AC Receptacle.
2) Remove media from the printer. Open
the Cutter Assembly, disconnect the
Cutter Cable from the Hinge Plate
Jack, and then remove the Cutter
Assembly from the Hinge Plate.
Cutter
Cable
Cutter
Assembly
6
Power Switch
AC Receptacle
Hinge Plate
Jack