Datamax M-Class Mark II 빠른 시작 매뉴얼 - 페이지 5
{카테고리_이름} Datamax M-Class Mark II에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datamax M-Class Mark II 8 페이지. Rfid option
Datamax M-Class Mark II에 대해서도 마찬가지입니다: 매뉴얼 (6 페이지), 매뉴얼 (8 페이지), 빠른 시작 매뉴얼 (4 페이지), 매뉴얼 (10 페이지), 빠른 시작 매뉴얼 (8 페이지), 빠른 시작 매뉴얼 (6 페이지)
페이지 인쇄
Set the Printer
RFID default settings (listed below by encoder [MODE] type) can be modified via the Control Panel:
HF RFID Default Settings (MODE = HF):
RFID POSITION = 1.1
TAG TYPE = ISO 15693
RETRY ATTEMPTS = 3
UHF RFID Default Settings (MODE = UHF):
RFID POSITION = 1.1
TAG TYPE = GEN 2
TAG DATA SIZE = 96-BIT
RETRY ATTEMPTS = 3
Change an RFID default by selecting, modifying, and saving the desired setting(s):
Step
1
Press MENU.
Using the DOWN Button, scroll to PRINTER OPTIONS and then
2
press ENTER.
3
Scroll to RFID and then press ENTER.
Scroll to the setting to be modified (for example, RETRY ATTEMPTS)
4
and then press ENTER.
Enter the desired setting, and then press ENTER. An asterisk will
5
appear next to the setting.
Press ESC; and, at the SAVE CHANGES prompt, press ENTER to
6
complete the setup.
Notes: (1) If NOT INSTALLED is displayed after selecting RFID, the wrong device may be enabled;
go to the MODE setting and ensure that the correct RFID device has been selected.
(2) To restore factory defaults, select SET DEFAULTS in the RFID options menu.
Instruction
3
Display