Datamax C82-00-48000S04 매뉴얼 - 페이지 6

{카테고리_이름} Datamax C82-00-48000S04에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datamax C82-00-48000S04 10 페이지. Cutter option

Step 4: Configuring the Printer

While the Cutter option is a plug and play device, this step may be necessary if the printer's default

configuration has been changed. Follow the steps below to configure the printer:



Note: In the following procedure, consult the Operator's Manual for detailed front panel instructions.

A) Press the MENU Button on the printer's front panel.

B) Using the DOWN Button, scroll to PRINTER OPTIONS then press the RIGHT Button.

C) Using the DOWN Button, scroll to CUTTER then press the ENTER Key.

D) Using the DOWN Button, scroll to AUTO then press the ENTER Key.

E) Press the EXIT Key then, at the SAVE CHANGES? prompt, select YES.

F) Turn the Power Switch 'Off' and 'On' to reset the printer and complete the configuration.