Datamax A Class Mark II 설치 지침 매뉴얼 - 페이지 13

{카테고리_이름} Datamax A Class Mark II에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datamax A Class Mark II 14 페이지. Cutter option

Testing the Cutter

The printer features a diagnostics menu that allows the function of the Cutter option to be verified. During

testing, results will be displayed in a running counter following each cutter-cycling attempt made by the

printer. Follow the steps below (or consult the Operator's Manual, if necessary) to perform a functional

test of the Cutter:

A) Press the MENU Key on the printer's front panel.

B) Using the ↓ Key, scroll to DIAGNOSTICS then press the ENTER Key.

C) Using the ↓ Key, scroll to OPTIONS TESTING then press the ENTER Key.

Using the ↓ Key, scroll to TEST CUTTER then press the ENTER Key.

E) Using the ↓ Key or the ↑ Key, select the number of test cycles (1, 10, or 100 times) that you want to perform.

Press the ENTER Key to begin the test.

Note: At any time during the testing phase, press the CANCEL Key to terminate testing and return

to operating mode.