Datamax A Class Mark II 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} Datamax A Class Mark II에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datamax A Class Mark II 14 페이지. Cutter option

페이지 인쇄

Step 1: Preparing the Printer

A) Turn 'Off' the Power Switch, unplug the

power cord from the AC Receptacle,

disconnect all interface cables and, if

necessary for total access, remove the

printer from the applicator system.

B) Raise the Access Cover and the Head

Lift Lever. Remove any media from the

printer then lower the Head Lift Lever.

C) If the Warning Label covers the Cable

Receiver in the Access Cover, remove

the Warning Label. (For the Cable

Receiver's location, see the illustration in

Step 2, part C.)

D) Remove the following items from the Card

Cage:

Remove the two Card Cage Cover

Screws then remove the Card Cage

Cover;

Remove the two Main Logic CCA

Screws then remove the Main Logic

CCA; and,

Remove the two Applicator Interface

CCA Screws then remove the Applicator

Interface CCA.

Receptacle

Power Switch

Access Cover

Head Lift Lever

Warning

Label

Card Cage

Main Logic

CCA

Main Logic

CCA Screws

(2 places)

Card Cage

Cover

Access

Cover

Applicator

Interface CCA

Applicator

Interface CCA

Screws

(2 places)

Card Cage

Cover Screws

(2 places)