Dutec BaudMaster BMUSB-R5IS 사용자 설명서 - 페이지 9
{카테고리_이름} Dutec BaudMaster BMUSB-R5IS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dutec BaudMaster BMUSB-R5IS 18 페이지. Usb to rs-232 converter
TM
BaudMaster
Virtual COM Port Driver Installation for Windows 2000
Follow these steps in install the Windows 2000 VCOM driver:
1.
Connect the USB cable between the host computer and the converter. If using a self-
powered converter turn on the input power source.
2.
Windows will open a "Found New Hardware Wizard" window. Click Next to continue.
3.
Select "Search for a suitable driver for my device (recommended)" and click Next.
4.
Select "Specify a location" and click Next.
5.
Click Browse to locate the "bdmrbus.inf" driver installation file. The default location is
the "C:\BaudMaster\BMUSB" directory. Once this file is selected click OK.
6.
Verify that the correct path and filename are shown and click Next.
7.
Click Finish to finish installing the "BaudMaster USB Composite Device".
8.
Windows will open a second "Found New Hardware Wizard" window. Click Next to
continue.
9.
Select "Search for a suitable driver for my device (recommended)" and click Next.
10. Select "Specify a location" and click Next.
11. Click Browse to locate the "bdmrw2k.inf" driver installation file. The default location is
the "C:\BaudMaster\BMUSB" directory. Once this file is selected click OK.
12. Verify that the correct path and filename are shown and click Next.
13. Click Finish to finish installing the "BaudMaster USB to UART Bridge Controller".
Virtual COM Port Driver Installation for Windows 98 SE
Follow these steps in install the Windows 98 VCOM driver:
1.
Connect the USB cable between the host computer and the converter. If using a self-
powered converter turn on the input power source.
2.
Windows will open a "Found New Hardware Wizard" window. Click Next to continue.
3.
Select "Search for the best driver for your device (Recommended)" and click Next.
4.
Select "Specify a location".
5.
Click Browse to locate the "C:\BaudMaster\BMUSB" directory. Once this directory is
selected click OK.
6.
Verify that the correct path and filename are shown and click Next.
7.
Click Finish to finish installing the "BaudMaster USB Composite Device".
8.
Windows will open a second "Found New Hardware Wizard" window.
9.
Select "Search for the best driver for your device (Recommended)" and click Next.
10. Select "Specify a location".
11. Click Browse to locate the "C:\BaudMaster\BMUSB" directory. Once this directory is
selected click OK.
12. Verify that the correct path and filename are shown and click Next.
13. Click Finish to finish installing the "BaudMaster USB to UART Bridge Controller".
©
Copyright
2006 duTec 1–800-248-1632
BMUSB RS232 User's Manual
9