Datapath The VisionAV-SDI 사용자 설명서 - 페이지 6

{카테고리_이름} Datapath The VisionAV-SDI에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datapath The VisionAV-SDI 14 페이지. Three channel audio and video capture card
Datapath The VisionAV-SDI에 대해서도 마찬가지입니다: 매뉴얼 (2 페이지)

페이지 인쇄
Datapath The VisionAV-SDI 사용자 설명서
Power Requirements
Operating Temperature
Storage Temperature
Relative Humidity
Warranty
We are continuously developing the technology used within our product ranges delivering outstanding
innovative solutions, therefore the specification may change from time to time.

Unpacking

Your packing box should contain the following items:
1 x DVI/VGA Adapter
1 x DVI/Component Adapter
1 x DVI/HDMI Adapter
Installation CD
Note:
All plug-in cards are static sensitive and are packed in anti-static material. Please keep the card in its
packaging until you are ready to install.
It is recommended that you do not discard the packing box until you are completely satisfied with the
VisionAV-SDI capture card and it is fully installed and working correctly. We also recommend that you
make a note of the serial number of the card in a prominent place before the card is plugged into the
computer. This should hasten any query should you need to contact our Technical Support
Department. The serial number is displayed on the card itself and the box label.
Max current at 12V – 0.5A
Max current at 3.3V – 0.8A
Thermal dissipation – 6.5W (typical)
0 to 35 ºC ( 32 to 96ºF)
-20 to 70 ºC ( -4 to 158ºF)
5% to 90% non-condensing
3 years
VisionAV-SDI
√
√
√
√