Datapath VSN Series 빠른 시작 매뉴얼 - 페이지 12

{카테고리_이름} Datapath VSN Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datapath VSN Series 20 페이지. Wall controller
Datapath VSN Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (20 페이지), 빠른 시작 매뉴얼 (20 페이지)

페이지 인쇄

VSNMicro 600 Quick Start Guide

The DDCT can recommend the best wiring configuration for your

system, ensuring the load is balanced between the graphics hardware.

Click on Recommended for the optimal configuration for your system.

Should you wish to manually wire your system and decide for yourself

which output is connected to which display, click on Custom. You will

be next be presented with the Summary page:

If you chose to have the DDCT configure your wiring this page will

display the recommended connections, as shown above. Connect

each display to the corresponding output connector on the rear of the

VSNMicro 600. If your VSNMicro 600 is connected to a printer, you can

print a copy of the wiring diagram using Print a Wiring Diagram.

Note: The Datapath Diagnostic Suite must be installed to print a wiring

diagram. The suite can be downloaded from the Datapath website

downloads page.