DUUN VM370 조립 지침 - 페이지 4

{카테고리_이름} DUUN VM370에 대한 조립 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. DUUN VM370 4 페이지.

Figure 5

Wit

h cooler

1. Remove cover and mount the cooler with 4 screws as shown in Figure 1.

2. Connect the A and B in Figure 3, unscrew hydraulic fitting B from tank. On coupling B is a

small washer inside the connector to be included when installing the connector in the cooler.

3. Mount non-return valve (18) as shown in Figure 5.

4. Connect A and B on the cooler (Figure 4) Be sure to insert the small washer.

5. Disconnect hose 1 and 2 from the cooler to the tank (Figure 4 and 5)

6. Connect the power cord to the electrical contact Dc 12 v. Blue are negative.The cooler

starts at about 50 degrees temperature. Remember to look for rotation when the fan starts.

7. Replace the cover

(3)3)