Datapath VSN400 Series 빠른 시작 매뉴얼 - 페이지 6

{카테고리_이름} Datapath VSN400 Series에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datapath VSN400 Series 17 페이지. Wall controllers
Datapath VSN400 Series에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (12 페이지)

페이지 인쇄
Datapath VSN400 Series 빠른 시작 매뉴얼
VSN400 Quick Start Guide

STEP 5 WINDOWS 10 SETUP

Once the system has been configured in our factory the operating system is resealed,
meaning that when switching on the system for the first time the operating system
setup commences.
You will be prompted to enter information to set up your wall controller.
There is no requirement for users to enter a product key to activate Windows 10,
activation is done automatically when connected to the internet.
You are strongly recommended to create a Restore USB Flash Drive. (See Step 8).

STEP 6 DISPLAY CONFIGURATION

Once the Windows setup is complete, the Display Driver Configuration Tool (DDCT) is
displayed. The DDCT will guide you, step by step, through the configuration of the graphics
outputs, enabling you to quickly create one or more video walls.
On the final stage of the configuration, the (DDCT) will recommend the optimum way
to connect your VSN400 to your video wall displays.
You can access the configuration tool at anytime should you wish to make changes.
Right click on the desktop and select Display Driver Configuration Tool from the menu.
A full description of the Display Driver Configuration Tool can be found in the User Guide
located in the system support folder.
6