Datapath VSN870 사용자 설명서 - 페이지 14

{카테고리_이름} Datapath VSN870에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datapath VSN870 20 페이지. Video wall controller

Fig.12

If you are connecting more than two expansion chassis together, you can continue to expand the gen lock

link to further downstream chassis by fitting a H-link board into the first slot of the first expansion chassis

and by connecting a gen-lock cable from the S-Link board directly into the H-Link card in the expansion

chassis, whilst at the same time connecting the H-Link output to the next Image4 graphics card. See the

following picture as an example. In this way you can create very large systems and maintain the gen

locking capability between all Image4 graphics cards.

Note: If the ImageDP4 graphics cards are being used in the system, ribbon cables are not required for

gen-locking as the ImageDP4 uses the PCI reference clock as a gen lock source.