Datapath ALIGO RX100 빠른 시작 매뉴얼 - 페이지 8
{카테고리_이름} Datapath ALIGO RX100에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datapath ALIGO RX100 12 페이지.
Datapath ALIGO RX100에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (7 페이지)
페이지 인쇄Aligo Quick Start Guide
LED'S
The green power LED indicates that the device is connected to a power supply and is
Power
switched on. Amber power LED means power is available, but board is switched off
(RX100 only).
Off - The device is still powering up.
Flashing on/off - Indicates the device has booted correctly (occurs approximately
30 seconds after power on) but it is not currently registered with the active
Link
Aetria Network Manager server.
Solid on - Indicates that the device has booted and the device is currently registered
by the active Aetria Network Manager server.
Flashing on/off - Indicates that no stable video has been received/transmitted since
last power on.
Off - Indicates that no stable video is currently being received/transmitted, but video has
Video
previously been received/transmitted on one or more channels since the last power on.
Solid on - Indicates that a stable video source on one or more channels has been locked
onto by the device and transmitted out onto the network (TX) / received from the network
and output to HDMI sink (RX).
The Aligo QTX100 and Aligo RX100 have LEDs on the 10G ports to indicate that each
10G Ports
network channel has good stable power.
8