Datapath VSN870-RPSU 빠른 시작 매뉴얼 - 페이지 5
{카테고리_이름} Datapath VSN870-RPSU에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datapath VSN870-RPSU 14 페이지.
페이지 인쇄Rear View
Each custom configured Vision800 will differ depending on the number of output cards and capture cards
installed. The illustration below (Fig.3) is an example of the rear panel and shows the six types of card that
may be installed in the Vision800:
•
Image4 card (outputs
•
VisionRGB-E2S card (inputs
•
VisionSD4+1S card (inputs
•
VisionSD8 card (input 7)
•
VisionRGB-E1S (inputs 8)
•
VisionDVI-DL card (input 9)
•
VisionSDI2 card Input (inputs
In this example the configuration would support a four screen display wall,
DVI sources
(3, 4, 5
and 8) and a total of twelve SD Composite or S-Video sources, four into the 4 Channel
SD plus 1 DVI Capture card (6) and eight into the VisionSD8 card (7), one DVI Dual-Link source (9) and two
SD-SDI/HD-SDI/3g-SDI sources
Key
P1
Power Connectors. (Only one power connector for the ATX model.)
P2
Main Power Switches. (Only one main power switch on the ATX model.)
1
Image4 graphics card output connector - For connecting output cables (Fig.4)
2
Image4 graphics card output connector - For connecting output cables (Fig.4)
3
VisionRGB-E2S capture card DVI-I Input connector = RGB/HD/HDMI/DVI source. (Fig.5/6/7/8)
4
VisionRGB-E2S capture card DVI-I Input connector = RGB/HD/HDMI/DVI source. (Fig.5/6/7/8)
5
VisionSD4+1S capture card DVI-I Input connector – = RGB/HD/HDMI/DVI source. (Fig.5/6/7/8)
6
VisionSD4+1S capture card D-Type Input connector = SD Composite/S-Video sources. (Fig.11)
7
VisionSD8 capture card D-Type Input connector = SD Composite/S-Video sources. (Fig.12)
8
VisionRGB-E1S capture card DVI-I Input connector = RGB/HD/HDMI/DVI source. (Fig.5/6/7/8)
9
VisionDVI-DL capture card Dual Link DVI-D Input connector = Dual Link DVI source. (Fig.9)
10
VisionSDI2 capture card BNC Input connector 1 = SD-SDI/HD-SDI/3G-SDI sources. (Fig.10)
11
VisionSDI2 Capture card BNC Passthrough connector for input connector 1. (Fig.10)
12
VisionSDI2 capture card BNC Input connector 2 = SD-SDI/HD-SDI/3G-SDI sources. (Fig.10)
13
VisionSDI2 Capture card BNC Passthrough connector for input connector 2. (Fig.10)
S1
Aux Inputs connectors.
S2
USB Input connectors.
S3
Network connectors.
S4
VGA Output connector for the Control Screen
1
and 2)
3
and 4)
5
and 6)
10
and 12)
(10
and 12).
Fig.3 (Model shown - RPSU)
(1
5
and 2) four RGB/HD/HDMI/