Dataprobe iBoot 매뉴얼 - 페이지 17

{카테고리_이름} Dataprobe iBoot에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dataprobe iBoot 20 페이지. Web enabled remote power control
Dataprobe iBoot에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)

페이지 인쇄

1. Setting Ip Address

iBoot Ver 1.5

Page 17

Program Control ibootctl.exe

Dataprobe provides a remote control program to control iBoot

directly. This program is useful for creating simple desktop icons

for specific power functions for one or more iBoots. It can also

be run from a command line and can be called by other

programs. (Batch files etc.)

For example, ibootctl.exe can be used as the double click action

with WhatsUp Gold or other network monitoring programs.

Download ibootctl.exe from dataprobe's web site at

http://www.dataprobe.com/files/power/ibootctl.exe or

http://www.dataprobe.com/files/power/iboot.exe for ibootctl.exe

and ibootrst.exe the reset program.

Direct TCP/Telnet Control

For application developers, iBoot also supports control via direct

TCP communications. To control iBoot in this manner requires

opening a socket to iBoot and sending specific commands.

Information on the required techniques and protocol are

available at Dataprobe's web site at

http://www.dataprobe.com/files/power/iboot_tcp.pdf or by

contacting Dataprobe directly. Dataprobe can provide perl

scripts and other programmer resources to assist in integration

of iBoot into any system.

User Settings

Record your Setup here for reference

Location

MAC Address

IP Address

Subnet Mask

Gateway

Port