Dataprobe iBoot 매뉴얼 - 페이지 4
{카테고리_이름} Dataprobe iBoot에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dataprobe iBoot 20 페이지. Web enabled remote power control
Dataprobe iBoot에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)
페이지 인쇄
iBoot Ver 1.5
Auto-Ping
The Auto-Ping feature allows iBoot to automatically detect failed
equipment and perform a timed reboot or other power control
function (like turning on an indicator or siren). You set any IP
address to be periodically Ping'ed. When iBoot no longer
detects a response from the address, the programmed power
control function is actuated.
♦
Use Auto-Ping Locally: Put iBoot next to the device to be
monitored and reboot it automatically when it no longer
responds.
♦
Use Auto-Ping Remotely: Put iBoot at a central facility to
monitor a remote system and power up an alert when the
remote device no longer responds.
Local Ping
Example:
iBoot monitors local device
and automatically reboots
it if there is no response
Remote Ping
Example 1:
iBoot monitors network
connection and reboots
when there is no response
Example 2:
iBoot monitors remote
device and powers up
alarm when there is
no response
Inter- or
Response
Intra- Net
Ping
Pwr Out
Uplink
Downlink
Pwr In
Page 4
Pwr Out
Uplink
Downlink
Pwr In
Ping
Response
Ping
Pwr Out
Uplink
Downlink
Pwr In
Response