Dataprobe iBoot 매뉴얼 - 페이지 3
{카테고리_이름} Dataprobe iBoot에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dataprobe iBoot 20 페이지. Web enabled remote power control
Dataprobe iBoot에 대해서도 마찬가지입니다: 사용 설명서 (16 페이지)
페이지 인쇄
iBoot Ver 1.5
General Description
The iBoot is a network attached, IP addressed, Web Controlled
AC power switch. Anyone with a web browser can access iBoot
to perform power On, Off or Reboot (timed power shutdown).
iBoot is password protected for security.
iBoot uses international standard IEC320 Connections and is
selectable from 115VAC or 230VAC. iBoot handles circuits up to
12 Amps (10 Amps at 230VAC).
Uses for iBoot:
♦
Remote reboot of any device, routers, servers, kiosks, etc.
The device to be rebooted need not be network attached.
♦
Secure sensitive devices by keeping them powered off when
not in use. This prevents hackers from seeing them at all
times.
♦
Power down equipment when not needed for power savings
and to save on wear and tear.
♦
Power up alert devices like sirens, lamps, messages; or
control environmental system like heaters, coolers pumps,
etc.
Inter- or
Intra- Net
PC with
Web Browser
iBoot
Web Controlled
Power Switch
Uplink
Downlink
Pwr In
10/100
Ethernet
Page 3
Pwr Out