Dataprobe iPIO-8 매뉴얼 - 페이지 5
{카테고리_이름} Dataprobe iPIO-8에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dataprobe iPIO-8 15 페이지. Ethernet i/o monitor and control
Dataprobe iPIO-8에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)
페이지 인쇄iPIO-8
WEB Page Access
The web pages provide status information on the
inputs and outputs of the iPIO-8, as well as provide
configuration for the unit. Open a browser to the
default or current IP address of the unit. Enter the
default username and password:
Factory Defaults:
IP Address
User Credentials
User Type
Administrator
General User
Status and Control
The Status and Control web page provides
real time status of the inputs, outputs and
remote iPIO-8 unit connections.
The top of the page indicates the iPIO-8
device the user is connected to. This
location ID is settable.
Each input, output and remote device is
defined by a user selectable name. Inputs
and outputs can also be assigned names
for Open and Closed statuses, as well as
background and text colors for each. All
configurations are accomplished via the
Setup button at the left of the screen.
If the iPIO-8 is programmed to
communicate with additional units, each
remote unit will be displayed at the bottom
of the page. Each remote site displays red or green, indicating connection status.
Operation
To operate any of the relays, click on the Change button associated with that relay.
To view the latest status, click on the Refresh button.
To access the configuration click the Setup button (Administrator Only).
To logout, click the Logout button.
192.168.1.254
Default Username / Password
admin / admin
user / user
iPIO-8 Login Page
Access
View, Control and Setup
View and Control
Page 5