Dataprobe iBoot-PDU8-2C20 빠른 시작 매뉴얼 - 페이지 2

{카테고리_이름} Dataprobe iBoot-PDU8-2C20에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dataprobe iBoot-PDU8-2C20 3 페이지.

페이지 인쇄

Changing the IP Address

1. Device Management Utility

Utility

Management

dataprobe.com/support-documents/iboot-pdu/

a. Open the DMU on a PC on the same physical network as

the iBoot-PDU and select Device > Discover to display

the current IP Address of the iBoot-PDU.

b. Select Set > Network Settings to change the network

settings. The IP settings can only be set within the first

two minutes of powering up the iBoot-PDU. The DMU

will only work with iBoots on the same physical subnets

as the PC

Complete instructions for the DMU are provided with the

download, and in the full iBoot-PDU Manual.

Web Page Setup

click on Device -> IP Address. Set the IP Mode to Static.

Enter the new IP Address, Subnet Mask, Gateway and DNS,

then click Save. Click Save to store the settings as entered.

Once saved, they are held as Pending.

process, reboot the iBoot-PDU. When the iBoot-PDU is ready

for reboot, a notification will appear at the top left of the

dashboard. Click on notifications, then reboot.

To get all the benefits of your iBoot, register



Notification of Updates



Expedited Warranty Service

Web Browser Control

The iBoot-PDU web interface provides the easiest means

of operating the outlets and monitoring the current status of

the units. One or more outlets can be simultaneously

controlled with a few mouse clicks.

To Control any of the outlets, From the Dashboard screen,

highlight the outlet(s) to be controlled with a mouse click,

then click on the desired Action Buttons ON – OFF -

CYCLE

When Cycle is selected, the outlet(s) will cycle for the

amount of time set (default 10 Seconds). When more than

one outlet is controlled to turn on, there will be a delay

between outlets turning on, as set by the delay setting

(default 1 Second).

iBootPDU Quick Start

Obtain the Device

(DMU)

from

Dataprobe's

From the home page (Dashboard),

To complete the

website

it:

dataprobe.com/product-registration-form



Exclusive Offers



Advanced End-of-Life Notification

v170731e