Dataprobe MAC-32-OD 설치 및 작동을 위한 추가 지침 - 페이지 7

{카테고리_이름} Dataprobe MAC-32-OD에 대한 설치 및 작동을 위한 추가 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Dataprobe MAC-32-OD 9 페이지.

Model MAC-32-OD

TO BE WELL CONNECTED IS VERY IMPORTANT !!!

When connecting equipment to the MAC-32-OD, it is imperative that the correct connector pin-outs and

cable type are used.

1> For the RS-485 six position RJ-11 jack, DO NOT use a standard telephone type cable that reverses

the connections between ends. Use only a DATA type cord that maintains the same pin positions at

each end to preserve the correct polarity required between connected equipment.

2> For the RS-232 eight position RJ-45 jack, USE ONLY a data type cable and observe the pin

positions as shown below for this type of jack. The relationship between the RJ-45 jack and a standard

RS-232 connector pin out for MAC-32-OD is shown on page 6 of this manual.

3> Under NO circumstance ever insert or use an RJ-11 plug in an RJ-45 socket. The pins in the socket

will be deformed, leading to poor connections.

COM 1

RS-485

1 2 3 4 5 6

RJ-11

Standard Modular telephone Cable, Note Reversal!

Modular Data Cable. Pin to Pin

RS-232

1 2 3 4 5 6

7 8

RJ-45

Page 7