AGRI-COVER Lomax Stance 설치 지침 매뉴얼 - 페이지 7
{카테고리_이름} AGRI-COVER Lomax Stance에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AGRI-COVER Lomax Stance 13 페이지.
페이지 인쇄TROUBLESHOOTING
PROBLEM
Top of tailgate hits cover when attempting
to close
Gap between cover and truck box or
tailgate
Seal on edge of cover is not sealing tight
with top of side rail and truck box
Latch doesn't engage
Cover is not parallel with side rails
SOLUTION
•
Verify side rail guide is set on top of box.
•
Side rails are not level or set too low at
rear of cover, raise rails at rear of box
until cover no longer interferes with
tailgate operation (see Step 1).
•
Verify side rail guide is set on top of box.
•
Side rails are not level or set too high
(see Step 1).
•
Verify side rail guide is set on top of box.
•
Check side rails for height and level
(see Step 1).
•
Check side rails for height and level
(see Step 1).
•
Inspect latches for jammed or broken
parts.
•
With cover installed on box, loosen
hardware on both retainment brackets
with 7/16" wrench (DO NOT REMOVE
HARDWARE). Unfold cover to closed
position and square up with box.
Carefully fold cover back to open
position and retighten retainment
brackets' hardware.
7