ADE KWE Series 운영 매뉴얼 - 페이지 9

{카테고리_이름} ADE KWE Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADE KWE Series 16 페이지. Compact scale in stainless steel housing

Power Saving Mode / Standby (only for models with rechargeable batteries)

3.5

Please start as described in the beginning of chapter 3 to enter this menu and „SAU" is shown

in the display.

By pressing [TARE] the Standby function can be enabled or disabled. Default is "SAU_2".

Adjustment 0:

Standby disabled. Backlight of display is always on.

Adjustment 1:

Standby enabled. After 40 seconds display is showing "0", backlight

automatically switches off. By putting something on the weighing platform

again, backlight of display will switch on again.

Adjustment 2:

Standby enabled. After 40 seconds display is showing "0", backlight

automatically switches off. By putting something on the weighing platform

again, backlight of display will switch on again. If nothing will be put on the

weighing platform within ten minutes, the scale automatically switches off.

3.6

Please start as described in the beginning of this chapter to enter this menu and „SPd" is

shown in the display.

By pressing [TARE] the speed of the displayed weighing results can be adjusted. Default is

"SPd_1".

Adjustment 0: Speed low

Adjustment 1: Speed high

3.7

Please start as described in the beginning of chapter 3 to enter this menu and „drl_" is shown in

the display.

There can be chosen between 5 adjustments (0 – 4) by pressing [TARE] again and again.

The higher the value the higher tracking range. Default is "drl_1".

KWE-190107-Rev008-UM-en