Dux Endurance Six 26XL 설치 관리자 매뉴얼 - 페이지 4

{카테고리_이름} Dux Endurance Six 26XL에 대한 설치 관리자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dux Endurance Six 26XL 14 페이지. Gas continuous flow water heater

Step 5

Water Connection

• Using correct plumbing methods,

connect the cold water pipe to the

heater.

Note: According to local regulations

and the plumbing code, fit any

and all valves that are necessary

e.g. tempering valves, pressure

limiting valves, duo valves, cold

water expansion valves etc. We

recommend the use of new valves for

all Installation. Please refer plumbing

code and/or local requirements.

• A Gate Valve or Ball Valve must be

used on the cold water inlet to the

water heater.

This requirement is an Australia

wide requirement under the national

plumbing code.

• Stop taps or combination stop taps

and non-return valves are not to be

used!

Step 6

Electrical Connection

• Continuous electrical power must

be supplied to the water heater. This

ensures correct performance of the

unit.

Installer's Guide – Endurance six™

Installation Guide

Hot

Water

Outlet

240 Volt

Continuous Power Supply

Cold

Water

Inlet

Part No: IG090701

Version: B