AGRI-COVER VANISH 설치 지침 매뉴얼 - 페이지 4

{카테고리_이름} AGRI-COVER VANISH에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AGRI-COVER VANISH 17 페이지. Roll-up cover

페이지 인쇄

1: INSTALLING SIDE RAILS (Continued)

E. Position side rail with weather strip

against inside lip of box. Push side rail

forward until it touches front of box.

IMPORTANT: Ensure strike is positioned

at rear of box.

F. At front, adjust top of side rail until flush

with top of box and hold with assistance of

another person or a spring clamp.

G. Install first clamp as close to front of

box as possible with clamp orientation that

provides best grip, turn nut finger tight, then

use 1/2" wrench to tighten.

IMPORTANT: To keep side rail secured

on truck, ensure clamp teeth engage

grooves on side rail.

NOTE: Images below illustrate clamping options. Option A depicts standard clamping

orientation lower on the rail. Option B depicts alternate clamping orientation with half of

clamp assembly rotated 180° to provide better grip at top of rail.

H. Verify side rail is level. If side rail is not level, perform one of the following:

If side rail tilts up: loosen and lower clamp, engage teeth and then retighten clamp.

If side rail tilts down: loosen and raise clamp, engage teeth and then retighten clamp.

Top of side rail flush

with top of box or

tailgate

OPTION A

This surface of

side rail should

be level

Adjust clamps

up or down until

they hold side

rail level when

tightened

Top of side rail

flush with top

side of box at

front

Top of side rail flush

with top of box or

tailgate

Strike at

rear

Position 1st clamp as close

to front of box as possible

OPTION B