Dux ProFlo series 소유자 매뉴얼 - 페이지 4
{카테고리_이름} Dux ProFlo series에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dux ProFlo series 16 페이지.
페이지 인쇄
Owner's Manual – Proflo Electric Storage Water Heaters
Installation Details
Location
The water heater should be located as
close as possible to the most frequently
used hot water outlet. Adequate
access must be made for service to the
element(s), thermostat, relief valve and
anode. Ensure that the data plate and
associated warnings are clearly visible.
Note: All models are equipped with a
sacrificial anode, accessible through the
top cover. Allow 50% of the height of
the water heater for clearance above to
replace the anode.
2
The product must be installed on a
flat, solid supporting surface.
A properly drained overflow tray must
be used where property damage could
occur from water spillage.
(See AS/NZS 3500.4 for further details.)
When installing this water heater in a
roof area as a mains pressure unit, refer to
local regulations.
Note: The warranty does not cover
damage due to leakage of the water
heater.
H0421
0421
Rev. K