Dux DUXHLS25 사용자 설명서 - 페이지 14

{카테고리_이름} Dux DUXHLS25에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dux DUXHLS25 20 페이지. 7.2kw inverter split-type room air conditioner

User Manual – Dux Comfort (7.2kW)

OPERATING TIPS

7. Dripping water may generate on the surface of the indoor unit when cooling in a high

relatively humidity (relative humidity higher than 80%). Adjust the horizontal louver to

the maximum air outlet position and select HIGH fan speed.

8. Heating mode (For cooling and heating models only)

The air conditioner draws in heat from the outdoor unit and releases it via the indoor unit

during heating operation. When the outdoor temperature falls, heat drawn in by the air

conditioner decreases accordingly. At the same time, heat loading of the air conditioner

increases due to larger difference between indoor and outdoor temperature. If a

comfor

table temperature can't be achieved by the air conditioner, the unit may be incorrectly

sized for the application.

9. Auto-restart function

Power failure during operation will stop the unit completely.

For the unit without Auto-restart feature, when the power restores, the OPERATION indicator

on the indoor unit starts flashing. To restart the operation, push the ON/OFF button on the

remote controller. For the unit with Auto-restart feature, when the power restores, the unit

restarts automatically with all the previous settings preserved by the memory function.

For some models, the machine is special designed with Auto-restart function for the open angle

of the horizontal louver.Power failure during operation or pressing the ON/OFF button on the

remote controller will stop the unit completely.When the power restores or pressing the ON/OFF

button on the remote controller again,the unit restarts automatically with all the previous settings

including the open angle of the horizontal louver by the memory function.So we strongly suggest

that the open angle of the horizontal louver should not be set too small,in case the condensed

water forms and drops from the horizontal louver. Press the AUTO/COOL button under the

front panel and the open angle of the horizontal louver will be restored to the standard angle

when the condensed water forms on the horizontal louver.

10. Lightning or a car wireless telephone operating nearby may cause the unit to malfunction.

Disconnect the unit with power and then re-connect the unit with power again. Push the

ON/OFF button on the remote controller to restart operation.