Dux Automatic 제품 설명서 - 페이지 11

{카테고리_이름} Dux Automatic에 대한 제품 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Dux Automatic 17 페이지.

Maintenance

Fluid Packing Replacement

Removal

1. Ensure the spray gun is depressurized.

2. Remove the air cap retaining ring air cap.

3. Remove the fluid tip using the DUX 10mm fluid

tip driver.

4. Unscrew the trigger housing and fully remove it,

along with the fluid needle and trigger piston

from the main spray gun body (See Figure 14).

CAUTION: The needle spring is under

pressure and is retained by this cap. It may

spring free when the cap is removed.

5. Using a flat-blade screwdriver, remove the

packing

adjustment

counter-clockwise (See Figure 15).

6. Insert the DUX fluid packing tool into the

stainless steel fluid barrel at the front of the

spray gun.

7. Remove the fluid packing components by

pushing the DUX fluid packing tool fully toward

the rear of the spray gun, forcing the packing

assembly out. Be sure to remove all packing

contents from the fluid tube (See Figure 16).

8. Inspect and clean the packing cavity inside the

spray gun.

If necessary, use a spray gun

cleaning brush to remove excess debris.

For customer service call 888.389.2732

(continued)

screw

turning

Figure 14

Figure 15

Figure 16

AUTOMATIC

Page 10