Duxot Accelero 사용 설명서 - 페이지 4

{카테고리_이름} Duxot Accelero에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Duxot Accelero 6 페이지. Chronograph watch

HOW TO SET THE DATE AND TIME

*Before setting the time, check that the

chronograph measurement is stopped.

1. Pull out the crown to the position [2]-(1st click).

2. Turn the crown clockwise until the previous day's

date appears.

3. Pull out the crown to the position [3]-(2nd click).

when the second hand is at the 12 o'clock

position. It will stop on the spot. Set the hands to

the desired time of the day (make sure AM/PM is

set correctly) by turning the crown.

* When the crown is at the position [3]-(2nd click),

do not press any pusher. Otherwise the

chronograph hands will move.

4. Push the crown back in the position [1] in

accordance with a time signal.

* Do not set the date between 9:00 P.M. and 3:00

A.M. , otherwise the day may not change properly.

If it is necessary to set the date during the time

period, first change the time to any time outside

it, set the date and then reset the correct time.