duxtop 8100MC 사용자 설명서 - 페이지 15

{카테고리_이름} duxtop 8100MC에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. duxtop 8100MC 20 페이지. Gold/silver
duxtop 8100MC에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지)

페이지 인쇄

Error Guide:

If an error code appears in the LED DISPLAY, follow the Instructions in the Error Code table (below)

to correct the problem.

Replacement table and comments for error codes on page 11.

Error

Code

No cookware detected.

incompatible cookware detected. Place compatible cookware on surface.

E0*

Cookware not centered on

ALIGNMENT GUIDE.

Excessive high temperature.

Cooking malfunction.

Inadequate ventilation.

Cooking surface temperature

E2*

exceeds 460°F (238°C).

Voltage input is either too high

E3*

or low.

When in POWER mode, cooktop

switches automatically to the

140°

lowest TEMPERATURE mode

(140°).

* Unit will shut off automatically after 1-minute. This is a safety feature to prevent overheating and

damage to cooktop.

Note: If any of the above remedies fail to correct the problem, please contact CustomerCare@

thesecura.com.

Problem

Place compatible cookware on surface.

Center cookware on ALIGNMENT GUIDE.

1. Remove cookware and unplug unit.

2. Ensure 4" clearance on all sides of unit for proper

ventilation.

3. Allow 10 minutes for unit to cool down and then

connect unit to a 120V outlet.

4. Place compatible cookware on unit.

5. Touch ON/OFF button and conﬁ rm fan is operating.

If in POWER MODE, switch to TEMPERATURE

MODE.

If boiling liquids, follow steps for E1 above.

1. Unplug unit from outlet.

2. Verify the outlet is 110/120V AC.

3. If not, switch to proper outlet or consult an

electrician.

This is not an error code or malfunction. This built-

in safety feature protects your food from being

overcooked and your cooktop from overheating. Please

refer to the TROUBLESHOOTING GUIDE on the

previous page for more information.

www.duxtop.com / www.thesecura.com

Induction Cooktop

Solution