Auscision 442 Class 운영 정보 매뉴얼 - 페이지 6
{카테고리_이름} Auscision 442 Class에 대한 운영 정보 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Auscision 442 Class 9 페이지.
페이지 인쇄DCC Function Table
F0
Directional Headlights
F1
Not in use. For future applications
F2
Playable Air horn
F3
Drive Hold (Full throttle feature)
F4
Dynamic Brake
F5
Locomotive Brake (Full throttle feature)
F6
Headlight Dimmer Control
F7
Front Number 1 End. Marker Light and Number Board Logic (See notes below)
F8
Prime Mover Locomotive Sound (Start/Stop)
F9
Rear Number 2 End. Marker Light and Number Board logic (See notes below)
F10 Manual Coupler sounds
F11 Coast (Full throttle feature)
F12 Run 8 (Full throttle feature)
F13 Manual Cooling Fan on/off
F14 Acceleration / Shunting mode (Turns off any momentum settings. Runs at half speed)
F15 Volume Fade Control (set at 50% normal volume level - ideal for loud multiple unit
consists)
F16 Manual Sanding Valve on/off
F17 Manual Compressor on/off
F18 Brake Set / Brake Release (Default is on. Automatically Brake Valve Sound plays when
moving off or stopping)
F19
Not in use
F20
Not in use
F21
Headlight, #1 / Front End (not directional)
F22
Headlight, #2 / Rear End (not directional)
F23
Number Boards #1 / Front End
F24
Number Boards #2 / Rear End
F25
White Marker Lights #1 / Front End
F26
White Marker Lights #2 / Rear End
F27
Red Marker Lights #1 / Front End
F28
Red Marker Lights #2 / Rear End
Auscision 442 Class Operating Information (v3)
Page 6 of 9