ADE LW300 Series 운영 매뉴얼 - 페이지 12
{카테고리_이름} ADE LW300 Series에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADE LW300 Series 20 페이지. Electronic, price-computing retail scales
페이지 인쇄
If you wish to store a new fixed tare weight, press the
unloaded to delete the stored tare weight. Place the new container to be tared on the weighing
platform and press the
To end the fixed tare function, press the
Combined fixed price and tare function
To simultaneously store a fixed price as the basic price and fixed tare weight, enter the desired
basic price using the numeric keys
surface and press the
The display "Weight" now shows by the arrows ▼ at the symbol ~ a stable measuring result, at
the symbol >0< the zero position and at the symbol NET the net weight mode. In the display
"Price" , the entered fixed price is shown as the basic price and ▼ for the FIX symbol indicates
the activated FIX function.
Now perform as many weighing operations as you wish with the same tared container and at
the same basic price.
If the tared container and the sample is removed from the load plate, the arrow ▼ at the symbol
>0< disappears and the tare weight is displayed as a negative value. The fixed basic price
remains on the display.
If you wish to store a new fixed tare weight, press the
Place the new container to be tared on the weighing surface and press the
If you wish to store a new fixed price as the base price, press the
base price and enter a new base price.
To end the combined fixed price and fixed tare function, press the
Backlight setting
Users can choose to enable or disable the backlighting of the scale display. Activating the
backlighting makes it easier to read the weighing results, but at the same time leads to
increased power consumption.
The scale offers three different backlight setting options:
oFF:
The backlight is switched off permanently.
on:
The backlight is switched on permanently.
AUto:
The backlight switches on automatically when the weighing surface is
loaded or after pressing a key, or off again after a short period without
weight movement or pressing a key.
To set the backlight, follow the instructions below:
In the weighing mode, press and hold the
The displays "Weight" and " Price" show bLSET MODE. The display "Total" shows the
selected option.
You can change the setting by pressing the direct PLU keys
12
key again.
key.
to
. Place the container to be tared on the weighing
key. Then fix both values by pushing the
9. Backlight and parameter settings
key for approximately 2 seconds.
key when the weighing platform is
key.
key to delete the stored tare weight.
key again.
key to delete the stored
key.
or
.
LW300_LW300T-200520-Rev005-UM-en