ADE LW300-6 운영 매뉴얼 - 페이지 6
{카테고리_이름} ADE LW300-6에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADE LW300-6 20 페이지. Electronic, price-computing retail scales
페이지 인쇄
6.
Switch on the scale. When switching on the scale, the weighing platform must be
unloaded. The scale runs through a test programme and acknowledges the end of the
power-on sequence with a sound signal.
If the weighing platform is loaded during the power-on sequence, the
scale is not properly ready for operation. Switch off the scale and turn
it on again.
7.
For precise measurement results, the goods to be weighed must be placed in the centre
of the weighing platform. The goods to be weighed should not protrude beyond the
weighing platform.
Assembling the tower display (LW300T series only)
1.
Insert the stand of the high display into the stand holder at the rear of the balance.
2.
Fasten the high display and platform for a secure connection with the enclosed screw.
3.
Place the scale on its side. Push the cable extending out of the stand back into the
stand.
4.
Insert the enclosed foam cover into the column from below.
5.
Set up the scale as described in chapter 6.
Never lift the scale using the column or the tower display.
Overview
4
5
6
6
7. Operating and display elements
1
2
3
9
8
11
11
8
11
11
10
7
LW300_LW300T-200520-Rev005-UM-en