DV Development Group DV4mini 사용자 설명서 - 페이지 9
{카테고리_이름} DV Development Group DV4mini에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DV Development Group DV4mini 12 페이지. D-star/dmr-hotspot-usb-stick
페이지 인쇄DV4mini
User Guide 2015
yours go to xrefector.net and query under USER Register or apply for one. (its
instant)
Hotspot call sign : If you entered your CCS7 ID the own call will automatically be
inserted and the letter D is per-entered. One cannot enter it manually. If several
hotspots are used then diferent letters must be used.
Location and QTH locator : They will be shown on the Xrefector page. The QTH
Locator MUST be entered in order to run this software !
D-STAR and DMR : select the mode you use
Power: Adjust the power level - see technical data
RX-QRG: this is the frequency the DV4mini receives on. When using DMR it is
also the transmit frequency.
TX-QRG: in D-Star mode you can operate in duplex mode (not in DMR) and you
can enter the transmit frequency here
Make sure you use SET after inputting your data to store them in the DV4mini
Refector selection: select a refector of your choice (in D-Star also specify the
port) and click "CONNECT" to create a connection or "DISCONNECT" to cut an
existing connection.
Below you see the S-meter. The RSSI value will be stored over a 24 hour period
and shown in the RSSI window. The display of the noise level may be diferent
from PC to PC. Depending on the noise level display values of -90 to -120 dBm are
possible.
In the monitor window you may fnd diagnostic info created by various program
segments. They are for experts but may be of interest for normal users to get a
better feel what is happening.
On the lower screen segment you fnd status reports. The CPU use is displayed as
a bar on the upper right.
- 9 -