DV Mark Bad Boy 120 소유자 매뉴얼 - 페이지 8
{카테고리_이름} DV Mark Bad Boy 120에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DV Mark Bad Boy 120 13 페이지.
페이지 인쇄TECHNICAL SPECS
Power Output: 120W
Preamp Tubes: 4x ECC83
Power Tubes: 2x KT88, 1x ECC83
Channels: Three
Controls (each ch): Gain - Master - Presence
EQ Controls (each ch): Low - Mid - High (passive)
Speaker Outputs:
. . . . . . . .Two 8 ohm (or one 4 ohm)
. . . . . . . .Two 16 ohm (or one 8 ohm)
. . . . . . . .One 16 ohm
Other Features:
. . . . . . . .Solo boost
. . . . . . . .Loop Assign rotary control
. . . . . . . .Effect Send level control / Mix
. . . . . . . .Bias (low/high switch)
. . . . . . . .Smart Controller
. . . . . . . .Service ATCS interface (optional)
Dimensions: 590 x 170 x 260 mm / 23.23" x 6.69" x 10.24" - Weight: 9,8 kg / 21.61 lbs
POWER REQUIREMENT: (Voltage is factory preset according to region of sale)
100V; 120V; 230V; 240V
50/60Hz
DV Mark amps/combos are manufactured to be sold and used in the country of purchase, and they are factory preset to at country's voltage.
Due to homologation issues, the voltage may not be changed.
8