ausdom S5 사용자 설명서 - 페이지 6

{카테고리_이름} ausdom S5에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ausdom S5 14 페이지.

7-2 Pairing the earphone with a phone

1. Make sure the earphone is off.

2. Do not place both devices more than one meter away from

each other.

3. Press and hold the power button on the earphone until it

powers on but don't let go just yet. Continue holding down on

the power button until you see the LED indicator flashes blue

and red alternately, which means your earphone is in "pairing

mode" waiting to be paired with your device. You will hear

"Pairing".

4.Start Wireless function on your phone and search for new

devices.

5.Select the "AUSDOM S5" to pair. Once successfully

paired,the blue LED will flash every five seconds.

Note: The earphone will power off if not paired within 10

minutes.

7-3 Connecting to paired devices

The earphone will pair with the last paired device automatically

when powered on. But for some computers or laptops you will

need to manually pair every time.

8. Taking and Answering a Call

8-1 Taking a call

1. Make sure the earphone is pairing to the mobile phone. Dial

through the mobile phone and press the call button on the

phone.

2.To end a call, press the function button once again or also

end the call directly by the phone.

Make sure the earphone is pairing with your phone. Please

refer to chapter 7. Pairing with Wireless Devices.

1.When a call rings, the earphone will sound the prompt voice.

2.Press the function button on your earphone or the answer

key on your phone to answer the call.

3.To end a call, press the function button once again or also

end the call directly by the phone.

EN-5