4ms PEG 사용자 설명서 - 페이지 9

{카테고리_이름} 4ms PEG에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. 4ms PEG 12 페이지. Pingable envelope generator, eurorack module

Gate Outputs (EOR/EOF/Half-Rise)

Each channel has a two gate outputs: End-of-Fall (EOF), and either End-of-Rise (EOR) or Half-Rise. A jumper

selects the latter (see photos below for location of jumpers).

End-of-Rise outputs a gate that goes high when the fall segment begins, and goes low when the

•

envelope completes. It is low during a sustain segment. The jack will stay low when the envelope is not

running. Another name for this jack might be "Envelope is Falling". See figure 10a.

End-of-Fall outputs a gate that goes high when the fall segment ends and goes low when a rise segment

•

ends. It is low during a sustain segment. It will stay high when the envelope is not running. Another

name for this jack might be "Envelope is Rising or Resting". See figure 10b.

Half-Rise outputs a gate that goes high when 50% of the envelope's rise time has elapsed. It goes low

•

when 50% of the fall time has elapsed. It is high during a sustain segment, and stays low when the

envelope is not running.

While the Curve and Scale parameters have no effect on the gate outputs, Skew has a big effect:

•

◦ Skew changes the pulse width of EOF and EOR. Turning Skew to the right (more CV) creates longer

EOR pulses and shorter EOF pulses. To the left, we get shorter EOR and longer EOF pulses.

◦ The width of the Half-R pulse is always 50% of the envelope time. Changing the Skew will change

the phase of the Half-R output. See figure 10c.

Red channel Half-Rise jumper installed. Remove

jumper for EOR.

Factory setting is removed.

Figure 10a: End-of-Rise (EOR)

aka "Is Falling"

Page 9

Blue channel Half-Rise jumper installed. Remove

jumper for EOR.

Factory setting is installed.

Figure 10b: End-of-Fall (EOF)

aka "Is Rising or Resting"

Figure 10c: Phase-shifting Half-R

Yellow trace is EOF, Blue is Half-R.

Skew knob being turned slowly.

Notice the phase shift from 180 to

almost 0 degrees, relative to the

rising edges.