ADE M111600 운영 매뉴얼 - 페이지 2

{카테고리_이름} ADE M111600에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ADE M111600 4 페이지. Electronic hanging baby scale
ADE M111600에 대해서도 마찬가지입니다: 운영 매뉴얼 (8 페이지), 사용 설명서 (12 페이지)

페이지 인쇄

Your ADE electronic baby hanging scale is a quality product. In order to get the most accurate results

please read and respect the instructions of the operating manual.

Insert batteries

Please use two 2 x CR2032 (lithium) batteries.

Open the battery compartment on the back side of the scale by loosening the fixing screws

carefully.

Insert the batteries respecting the polarity markings (+-).

Please ensure that the battery compartment cover is in place and secured via the fixing screws

before starting up the scale.

Please observe the valid legal regulations in your country, when disposing used batteries.

Function keys

There are 4 function keys on this scale.

Key ON/OFF to start or switch off the scale.

Key HOLD to activate / deactivate the automatic hold function.

Key SET to change the weighing mode from kg / lb / oz or to check

the room temperature.

Key TARE to reset the scale to zero.

Weighing

To achieve a reliable result make sure the scale is placed in a vertical position and no load is

hanging at the hook.

Press the ON/OFF key to start the scale. During the automatic zero and function test you will see

the

indication `8888´ in the display before `0.00´ will come up in kg mode.

2. You may now use the scale. Make sure to use a weighing trouser or cloth supplied as optional

extra by ADE.

3. To switch the scale off press the ON/OFF key again. Additionally the scale is equipped with an

automatic shut off function. Shutting down the scale after 60 seconds without use.

Tare function

Choosing this function you may weigh the baby together with additional objects (e.g. nappy, vest etc.) and

the weighing trouser or cloth without influencing the net weight result of the baby.

Press ON and wait for `0.00´ indication on the display.

Hang the weighing cloth or trouser including other possible objects (nappy, vest etc.) at the hook.

Press TARE to reset the scale to zero.

Remove all weights from the hook. The scale will now display the weight as negative value and will

hold the weight automatically.

Place the baby in the weighing trouser or cloth and hook it up to the scale. Press the hold key to

restart the weighing function. The scale will show the next weight of the baby.

To cancel all values press TARE again or switch off the scale.

engelse versie

Installation of scale

Operation

M111600-160929-Rev003-UM-de-e