Datasensor SE-DM 900 매뉴얼 - 페이지 4
{카테고리_이름} Datasensor SE-DM 900에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Datasensor SE-DM 900 11 페이지. Accessories for safety devices
페이지 인쇄SE-S SERIES
The floor stand of the SE-S series can be used for the installation of both the emitter
and receiver units of the SAFEasy
DM deviating mirrors series.
Five versions with different lengths are available in order to satisfy all application needs.
In particular the support post lengths available are given below:
800, 1.000, 1.200, 1.500, 1.800 mm.
Moreover protective stands of the SE-P series are available. These have to be mounted
on the support post using two M6 x 10 screws, and relative washers and square nuts.
The different lengths of the protective stands have been calculated to suit each safety
light curtain model.
ISTRUCTIONS FOR USE
Mount the three angle brackets (A) on the post using the nine M6 x 10 screws (B),
relative washers and square nuts inserting the latter in the side slot of the floor support
post (refer to the figure). Do not tighten the screws in order to allow the angle brackets
to move along the post.
Position the assembled part on the plate (C) and fix the angle brackets using the six M6
x 16 screws (D) and relative washers.
Tighten the fixing screws of the angle brackets to the post.
Before inserting the protection cap (E) on the top part of the post, the square nuts
necessary for the fixing of the emitting and receiving units or deviating mirrors have to
be inserted inside the front slot.
NOTE: For the correct safety device functioning, the floor stand has to be firmly
fixed to the ground using the four inserts given, ensuring that the post is
perpendicular to the ground.
The washers with an one-side opening (given in the package) can be used
to correct the post inclination respect to the ground, inserting them
between the support plate and the ground itself.
Floor stand
TM
safety light curtains series, as well as for the SE-
DIMENSIONS
Model
SE-S 800
E
SE-S 1000
SE-S 1200
SE-S 1500
SE-S 1800
B
A
A
C
D
856000380 Rev.00
L (mm)
X (mm)
800
30x30
1000
30x30
1200
30x30
1500
45x45
1800
45x45
C
A