AUSnew RM160-56D 빠른 시작 매뉴얼 - 페이지 3

{카테고리_이름} AUSnew RM160-56D에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AUSnew RM160-56D 4 페이지. Bariatric wheelchair

Congratulations on the purchase of your new G6 Excel Wheelchair. Equipped

with several features and accessory choices you are sure to enjoy the

benefits of this chair.

Please follow these simple steps to assemble your wheelchair –

1. With the chair upright, push down on the sides of the seat until it

clamps into position.

2. Height adjustable canes can be adjusted for the individual career by

loosening the screws at the base of the cane, adjust and retighting.

3. Fit legrests (both left and right) into the fitting from an outward angle

and turning inward until it locks into position. Footplate height can

be adjusted using the allen key provided. Loosen the footplate and

select the desired height, retighten to secure. Elevating legrest are

available for this chair and fit into place the same way as the

standard legrests. To adjust loosen the screw, select the desired

angle and retighten.

4. G6 Self Propel Wheelchairs have a quick release 24" wheel. To

release push the centre button on the axle and pull out. To reinstate

locate the axle back into bracket on the frame. Ensure it is fully

engaged before using the chair.

5. Armrests flip back and are removeable. To release the armrest push

the clip at the front and flip back, to re-instate clip back into the front

bracket and ensure it locks into place. To remove armrest push clip at

the front and pull lever at the rear then lift armrest out. Again

ensure clipped back in securely when replacing.

6. Care-assist hand brake provides added security for the person

pushing the chair. When the wheelchair is stationary, the hand brake

at the wheel should be applied for added security. To apply wheel

brake push forward, to release pull back.

Assembly / Adjustment