DV8 TCGL-01 설치 매뉴얼 - 페이지 4

{카테고리_이름} DV8 TCGL-01에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DV8 TCGL-01 6 페이지. In-bed adjustable tire carrier for jeep gladiator jt

6. Install the main carrier onto the passenger side mount by slipping the main tube over the passenger

mount tube. Then place the driver side mount into the main carrier tube and place it on the bed

mounts and secure into place.

7. Tighten all hardware at this point. Main carrier tube should easily move up and down. Next, secure

bolt pull locks into place using provided hardware. Make sure to put pull lock into one of two holes

on main center tube before securing.

is normal.

NOTE:

These may need to be tapped into placed initially. This