DV8 OFFROAD LPBM-02 설치 매뉴얼 - 페이지 2

{카테고리_이름} DV8 OFFROAD LPBM-02에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. DV8 OFFROAD LPBM-02 6 페이지. Flip-up license plate bracket

INSTALLATION

MANUAL

Begin by unpacking all items and inspecting

for missing pieces or damage. If you have any

concerns, please contact the company the

product was purchased from. Extra hardware

may be included with the product.

HARDWARE

INCLUDED

(2) M12x40mm Bolts

(8) M6 Flat Washers

(2) M12 Lock Nuts

(4) M12 Flat Washers

(4) M6x12mm Bolts

(4) M6 Lock Washers

STEP 1 |

Vehicles equipped with a

winch pull 1 foot of cable out.

If the vehicle is not equipped with a winch

please skip to step 8.

STEP 2 |

Using snap-ring pliers,

remove winch shackle hook snap-ring

and shackle pin.

Take caution not to lose the snap-ring

upon removal. It very easy to accidentally

release the load on the pliers and allow

the snap ring to fly off and never be found.

Set aside shackle pin and snap-ring to be

reinstalled later.

NEED HELP?

855-680-9595