Datasheen D902AS 사용자 설명서 - 페이지 5
{카테고리_이름} Datasheen D902AS에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Datasheen D902AS 16 페이지. Adsl2/2+ simple router
페이지 인쇄Introduction：
1、 Use a telephone cord to connect the LINE port of the splitter with the RJ-11 port (the phone jack) on
the wall.
2、 Use another telephone cord to connect the ADSL port of the splitter with the LINE port of the ADSL
Modem.
3、 Use another telephone cord to connect the telephone set with the PHONE port of the splitter.
4、 Connect Ethernet port of the ADSL MODEM with 10/100BASE-T port of the computer using the
network cable that comes with the modem.
5、 Plug in the power cord, and turn on the power.
If you do not want Internet services and telephone voice services simultaneously, please just connect the
LINE port of the ADSL Modem with the RJ-11 port (the phone jack) on the wall using a telephone cord. In this
case, the splitter is not necessary.
2.3 LED STATUS INDICATION
Status
POWER (red)
Steady light
Power on
Flashing
/
Fast flashing
/
Off
Power off
Table 2.3
LINK (yellow)
The modem is in good
connection
In handshaking status
/
Connection not set up
Page 5
Datasheen D902AS User Manual
DATA (green)
Connected with PC
Ethernet line is connected
/
/
Transmitting
or
Transforming data
receiving data
Not connected with PC
Ethernet line not
properly
connected properly
PC(green)
Total 16 Pages